Programmed Values

Programmed values are predefined values in the vehicle that can be altered by using the Programmed Values tab. With this functionality it is possible to program the vehicle to suit the customer's preference. For example, it is possible to set the interior light to be turned off within a specified number of seconds when the key is removed. Another possibility is to modulate the pre-set climate temperature range.

Note

This tab is only enabled if there are any programmable values available for the control module selected in the Control Module panel.

Fig. 216: Vehicle Communication page - Programmed Values

Each area of the page is explained in the subsections below.

1. Control Module panel

In the Control Module panel, deviations on the vehicle's network communication are presented in a graphic. The graphic reflects the vehicle's network with all control modules' status at the latest readout.

Fig. 217: The Control Module panel

The colour of the control modules in the graphic varies depending on status:

Colour	Description
Green	Control module responsive to communication.
Red	Control module not responsive to communication.
Grey	Control module not part of the vehicle configuration (it may, however, be in the relevant vehicle model).

An explanation of the colours is accessed by clicking the icon.

By selecting a control module in the graphic, the list under the Programmed Values tab is populated with all available programmable parameters for the selected control module.

2. Programmed Values tab

In this list, all available programmable parameters for the selected control module are listed.

Fig. 218: List of programmable parameters under the Programmed Values tab

The list is in some cases structured in categories. A icon is available in some of the category's header. By clicking such an icon, a reference document is opened under the tab on the right-hand side of the screen.

A programmable parameter is selected by ticking its corresponding checkbox or by double clicking. The parameters you select are transferred to the list under the Program Values tab on the right-hand side of the screen.

3. Program Values tab

Under this tab, selected programmable parameters under the Program Values tab are displayed in a list.

Fig. 219: The Program Values tab

The list is structured in two columns:

Column	Description
Parameters	Name of selected programmable parameter.
Current Value	Programmable parameter's value as read from the vehicle at last readout.
New Value	Select value to program from this drop-down menu.
Status	When a programming is completed, the status is indicated with either (successful) or (failed).

Select parameter(s) to program by ticking corresponding checkbox(es) in the list's left column. The programming is then started by clicking the Program button.

4. Information tab

By clicking a icon next to a program value category under the Programmed Values tab, the reference document for the category is presented here. The reference document contains descriptions of the programmable values.

Fig. 220: The Information tab

You may also be interested in:

Diagnostics how-to's (D2 and GGD)

Common icons